Chipper MAXIM 850 is a machine used mainly in chipping of after mining remains (lopping), where the maximal power is needed. At the same time it is also suitable for processing of waste from timber mill operations, pallets, railroad sleepers and whole tree trunks.
The machine is driven by output tractor shaft through the belt gear with pneumatic clutch, which secures fluent start up. During electric control of the machine there is a clutch for a fast switch off drive when sudden rotor jam occurs. The chipper fan does not depend on the rotor rotations and its speed can be changed mechanically. Therefore further chimney jam is minimalized.
The chipper is equipped by individual hydraulic circuit which controls all machine functions with fluent rotation regulation of pull-in belts. The chipper is controlled by a remote control with electric unit which has a congestion control. There is a drum rotor installed in the machine with adjustable knives and pivot blades. The chip size is given by renewable sieves. The machine is placed onto a tandem chassis with max. Speed up to 40 kph, there is a pendulum axle for easier passage terrain.

Standard equipment: chassis up to 40 kph, jointed shaft with friction clutch, control electronics, hydraulic circuit with fluent speed regulation of pull-in belts feeding, sieves with holes 30x30 and 50x50 mm.

Above standard equipment: sieves according to client´s request, modified rotor for fine chip production