| Port size |
420x390 mm |
| Max. diameter of processed material |
380 mm |
| Rotor diameter |
600 mm |
| Rotor speed |
1000 rpm |
| Number of knives |
4 pcs |
| Power demand (from a tractor) |
75 - 145 kW |
| Chipper output (chip quantity) |
up to 40 prm/h |
| Pull-in belt speed |
0 - 15 m.min-1 |
| Chip size |
5 - 70 mm |
| Chip size adjustment |
sieve |
| Renewable sieves with holes |
30x30 and 50x50 mm |
| Machine length (operating position) |
3600 mm |
| Machine width (operating position) |
2350 mm |
| Machine height (trucking position) |
2550 mm |
| Machine height (operating position – chimney) |
2980 mm |
| Pull-in belt height (operating position) |
870 mm |
| Chimney rotation |
270˚ |
| Machine weight |
2700 kg |
| Trucking speed |
40 kph |
| Input voltage for electronic and control |
=12 V |
| Hydraulic oil contents |
40 l |
| Lubricant grease |
Mogul LV 2-3 |
| Acoustic power level of Lwa |
126 dB |
| Tractor shaft drive |
 |
| Three-point linkage |
|
| Electric control of pull-in material |
|
| Special device on client´s request |
| Chassis up to 80 kph |
|
| Diesel engine |
|
| Remote control |
|
| Multiple number of knives in a rotor |
|
| Hydraulic controlled tilting table with pull-in belt |
|
| Top pull-in belt with hydraulic pressure |
|
| Hydraulic arm |
|
| Abroll frame |
|
| Container for chip on abroll frame |
|
